Mercurial > hg > nginx-vendor-0-7
annotate auto/summary @ 502:89dc5654117c NGINX_0_7_63
nginx 0.7.63
*) Security: now "/../" are disabled in "Destination" request header
line.
*) Change: minimum supported OpenSSL version is 0.9.7.
*) Change: the "ask" parameter of the "ssl_verify_client" directive was
changed to the "optional" parameter and now it checks a client
certificate if it was offered.
Thanks to Brice Figureau.
*) Feature: now the "-V" switch shows TLS SNI support.
*) Feature: the $ssl_client_verify variable.
Thanks to Brice Figureau.
*) Feature: the "ssl_crl" directive.
Thanks to Brice Figureau.
*) Bugfix: the $ssl_client_cert variable usage corrupted memory; the
bug had appeared in 0.7.7.
Thanks to Sergey Zhuravlev.
*) Feature: now the start cache loader runs in a separate process; this
should improve large caches handling.
*) Feature: now temporary files and permanent storage area may reside
at different file systems.
*) Bugfix: nginx counted incorrectly disk cache size.
*) Change: now directive "gzip_disable msie6" does not disable gzipping
for MSIE 6.0 SV1.
*) Bugfix: nginx always added "Vary: Accept-Encoding" response header
line, if both "gzip_static" and "gzip_vary" were on.
*) Feature: the "proxy" parameter of the "geo" directive.
*) Feature: the ngx_http_geoip_module.
*) Feature: the "limit_rate_after" directive.
Thanks to Ivan Debnar.
*) Feature: the "limit_req_log_level" and "limit_conn_log_level"
directives.
*) Bugfix: now "limit_req" directive conforms to the leaky bucket
algorithm.
Thanks to Maxim Dounin.
*) Bugfix: in ngx_http_limit_req_module.
Thanks to Maxim Dounin.
*) Bugfix: now nginx allows underscores in a request method.
*) Bugfix: "proxy_pass_header" and "fastcgi_pass_header" directives did
not pass to a client the "X-Accel-Redirect", "X-Accel-Limit-Rate",
"X-Accel-Buffering", and "X-Accel-Charset" lines from backend
response header.
Thanks to Maxim Dounin.
*) Bugfix: in handling "Last-Modified" and "Accept-Ranges" backend
response header lines; the bug had appeared in 0.7.44.
Thanks to Maxim Dounin.
*) Feature: the "image_filter_transparency" directive.
*) Feature: the "image_filter" directive supports variables for setting
size.
*) Bugfix: in PNG alpha-channel support in the
ngx_http_image_filter_module.
*) Bugfix: in transparency support in the ngx_http_image_filter_module.
*) Feature: now several "perl_modules" directives may be used.
*) Bugfix: ngx_http_perl_module responses did not work in subrequests.
*) Bugfix: nginx sent '\0' in a "Location" response header line on
MKCOL request.
Thanks to Xie Zhenye.
*) Bugfix: an "error_page" directive did not redirect a 413 error; the
bug had appeared in 0.6.10.
*) Bugfix: in memory allocation error handling.
Thanks to Maxim Dounin and Kirill A. Korinskiy.
author | Igor Sysoev <http://sysoev.ru> |
---|---|
date | Mon, 26 Oct 2009 00:00:00 +0300 |
parents | 116d5de7cbb6 |
children |
rev | line source |
---|---|
0 | 1 |
2 # Copyright (C) Igor Sysoev | |
3 | |
4 | |
92 | 5 ### STUB |
6 | |
7 if [ $USE_THREADS != NO ]; then | |
8 | |
9 cat << END | |
10 | |
11 $0: error: the threads support is broken now. | |
12 | |
13 END | |
14 exit 1 | |
15 fi | |
16 | |
17 ### | |
18 | |
19 | |
0 | 20 echo |
21 echo "Configuration summary" | |
22 | |
23 | |
372 | 24 #case $USE_THREADS in |
25 # rfork) echo " + using rfork()ed threads" ;; | |
26 # pthreads) echo " + using libpthread threads library" ;; | |
27 # libthr) echo " + using FreeBSD libthr threads library" ;; | |
28 # libc_r) echo " + using FreeBSD libc_r threads library" ;; | |
29 # linuxthreads) echo " + using FreeBSD LinuxThreads port library" ;; | |
30 # NO) echo " + threads are not used" ;; | |
31 # *) echo " + using lib$USE_THREADS threads library" ;; | |
32 #esac | |
6 | 33 |
0 | 34 if [ $USE_PCRE = DISABLED ]; then |
50 | 35 echo " + PCRE library is disabled" |
0 | 36 |
37 else | |
38 case $PCRE in | |
39 YES) echo " + using system PCRE library" ;; | |
40 NONE) echo " + PCRE library is not used" ;; | |
41 NO) echo " + PCRE library is not found" ;; | |
42 *) echo " + using PCRE library: $PCRE" ;; | |
43 esac | |
44 fi | |
45 | |
46 case $OPENSSL in | |
47 YES) echo " + using system OpenSSL library" ;; | |
48 NONE) echo " + OpenSSL library is not used" ;; | |
49 NO) echo " + OpenSSL library is not found" ;; | |
50 *) echo " + using OpenSSL library: $OPENSSL" ;; | |
51 esac | |
52 | |
26 | 53 case $MD5 in |
376 | 54 YES) echo " + md5: using $MD5_LIB library" ;; |
26 | 55 NONE) echo " + md5 library is not used" ;; |
56 NO) echo " + md5 library is not found" ;; | |
57 *) echo " + using md5 library: $MD5" ;; | |
58 esac | |
59 | |
202 | 60 case $SHA1 in |
376 | 61 YES) echo " + sha1: using $SHA1_LIB library" ;; |
202 | 62 NONE) echo " + sha1 library is not used" ;; |
63 NO) echo " + sha1 library is not found" ;; | |
64 *) echo " + using sha1 library: $SHA1" ;; | |
65 esac | |
66 | |
0 | 67 case $ZLIB in |
68 YES) echo " + using system zlib library" ;; | |
69 NONE) echo " + zlib library is not used" ;; | |
70 NO) echo " + zlib library is not found" ;; | |
71 *) echo " + using zlib library: $ZLIB" ;; | |
72 esac | |
73 | |
74 echo | |
75 | |
76 | |
28 | 77 cat << END |
42 | 78 nginx path prefix: "$NGX_PREFIX" |
79 nginx binary file: "$NGX_SBIN_PATH" | |
324 | 80 nginx configuration prefix: "$NGX_CONF_PREFIX" |
42 | 81 nginx configuration file: "$NGX_CONF_PATH" |
82 nginx pid file: "$NGX_PID_PATH" | |
28 | 83 END |
84 | |
18 | 85 if test -n "$NGX_ERROR_LOG_PATH"; then |
42 | 86 echo " nginx error log file: \"$NGX_ERROR_LOG_PATH\"" |
0 | 87 else |
88 echo " nginx logs errors to stderr" | |
89 fi | |
28 | 90 |
91 cat << END | |
42 | 92 nginx http access log file: "$NGX_HTTP_LOG_PATH" |
93 nginx http client request body temporary files: "$NGX_HTTP_CLIENT_TEMP_PATH" | |
94 nginx http proxy temporary files: "$NGX_HTTP_PROXY_TEMP_PATH" | |
95 nginx http fastcgi temporary files: "$NGX_HTTP_FASTCGI_TEMP_PATH" | |
28 | 96 |
97 END |