view src/os/unix/ngx_thread_mutex.c @ 9153:8f7e6d8c061e

QUIC: use last client dcid to receive initial packets. Previously, original dcid was used to receive initial client packets in case server initial response was lost. However, last dcid should be used instead. These two are the same unless retry is used. In case of retry, client resends initial packet with a new dcid, that is different from the original dcid. If server response is lost, the client resends this packet again with the same dcid. This is shown in RFC 9000, 7.3. Authenticating Connection IDs, Figure 8. The issue manifested itself with creating multiple server sessions in response to each post-retry client initial packet, if server response is lost.
author Roman Arutyunyan <arut@nginx.com>
date Wed, 30 Aug 2023 11:09:21 +0400
parents 022ea0d17177
children
line wrap: on
line source


/*
 * Copyright (C) Igor Sysoev
 * Copyright (C) Nginx, Inc.
 */

#include <ngx_config.h>
#include <ngx_core.h>


/*
 * All modern pthread mutex implementations try to acquire a lock
 * atomically in userland before going to sleep in kernel.  Some
 * spins before the sleeping.
 *
 * In Solaris since version 8 all mutex types spin before sleeping.
 * The default spin count is 1000.  It can be overridden using
 * _THREAD_ADAPTIVE_SPIN=100 environment variable.
 *
 * In MacOSX all mutex types spin to acquire a lock protecting a mutex's
 * internals.  If the mutex is busy, thread calls Mach semaphore_wait().
 *
 *
 * PTHREAD_MUTEX_NORMAL lacks deadlock detection and is the fastest
 * mutex type.
 *
 *   Linux:    No spinning.  The internal name PTHREAD_MUTEX_TIMED_NP
 *             remains from the times when pthread_mutex_timedlock() was
 *             non-standard extension.  Alias name: PTHREAD_MUTEX_FAST_NP.
 *   FreeBSD:  No spinning.
 *
 *
 * PTHREAD_MUTEX_ERRORCHECK is usually as fast as PTHREAD_MUTEX_NORMAL
 * yet has lightweight deadlock detection.
 *
 *   Linux:    No spinning.  The internal name: PTHREAD_MUTEX_ERRORCHECK_NP.
 *   FreeBSD:  No spinning.
 *
 *
 * PTHREAD_MUTEX_RECURSIVE allows recursive locking.
 *
 *   Linux:    No spinning.  The internal name: PTHREAD_MUTEX_RECURSIVE_NP.
 *   FreeBSD:  No spinning.
 *
 *
 * PTHREAD_MUTEX_ADAPTIVE_NP spins on SMP systems before sleeping.
 *
 *   Linux:    No deadlock detection.  Dynamically changes a spin count
 *             for each mutex from 10 to 100 based on spin count taken
 *             previously.
 *   FreeBSD:  Deadlock detection.  The default spin count is 2000.
 *             It can be overridden using LIBPTHREAD_SPINLOOPS environment
 *             variable or by pthread_mutex_setspinloops_np().  If a lock
 *             is still busy, sched_yield() can be called on both UP and
 *             SMP systems.  The default yield loop count is zero, but
 *             it can be set by LIBPTHREAD_YIELDLOOPS environment
 *             variable or by pthread_mutex_setyieldloops_np().
 *   Solaris:  No PTHREAD_MUTEX_ADAPTIVE_NP.
 *   MacOSX:   No PTHREAD_MUTEX_ADAPTIVE_NP.
 *
 *
 * PTHREAD_MUTEX_ELISION_NP is a Linux extension to elide locks using
 * Intel Restricted Transactional Memory.  It is the most suitable for
 * rwlock pattern access because it allows simultaneous reads without lock.
 * Supported since glibc 2.18.
 *
 *
 * PTHREAD_MUTEX_DEFAULT is default mutex type.
 *
 *   Linux:    PTHREAD_MUTEX_NORMAL.
 *   FreeBSD:  PTHREAD_MUTEX_ERRORCHECK.
 *   Solaris:  PTHREAD_MUTEX_NORMAL.
 *   MacOSX:   PTHREAD_MUTEX_NORMAL.
 */


ngx_int_t
ngx_thread_mutex_create(ngx_thread_mutex_t *mtx, ngx_log_t *log)
{
    ngx_err_t            err;
    pthread_mutexattr_t  attr;

    err = pthread_mutexattr_init(&attr);
    if (err != 0) {
        ngx_log_error(NGX_LOG_EMERG, log, err,
                      "pthread_mutexattr_init() failed");
        return NGX_ERROR;
    }

    err = pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_ERRORCHECK);
    if (err != 0) {
        ngx_log_error(NGX_LOG_EMERG, log, err,
                      "pthread_mutexattr_settype"
                      "(PTHREAD_MUTEX_ERRORCHECK) failed");
        return NGX_ERROR;
    }

    err = pthread_mutex_init(mtx, &attr);
    if (err != 0) {
        ngx_log_error(NGX_LOG_EMERG, log, err,
                      "pthread_mutex_init() failed");
        return NGX_ERROR;
    }

    err = pthread_mutexattr_destroy(&attr);
    if (err != 0) {
        ngx_log_error(NGX_LOG_ALERT, log, err,
                      "pthread_mutexattr_destroy() failed");
    }

    return NGX_OK;
}


ngx_int_t
ngx_thread_mutex_destroy(ngx_thread_mutex_t *mtx, ngx_log_t *log)
{
    ngx_err_t  err;

    err = pthread_mutex_destroy(mtx);
    if (err != 0) {
        ngx_log_error(NGX_LOG_ALERT, log, err,
                      "pthread_mutex_destroy() failed");
        return NGX_ERROR;
    }

    return NGX_OK;
}


ngx_int_t
ngx_thread_mutex_lock(ngx_thread_mutex_t *mtx, ngx_log_t *log)
{
    ngx_err_t  err;

    err = pthread_mutex_lock(mtx);
    if (err == 0) {
        return NGX_OK;
    }

    ngx_log_error(NGX_LOG_ALERT, log, err, "pthread_mutex_lock() failed");

    return NGX_ERROR;
}


ngx_int_t
ngx_thread_mutex_unlock(ngx_thread_mutex_t *mtx, ngx_log_t *log)
{
    ngx_err_t  err;

    err = pthread_mutex_unlock(mtx);

#if 0
    ngx_time_update();
#endif

    if (err == 0) {
        return NGX_OK;
    }

    ngx_log_error(NGX_LOG_ALERT, log, err, "pthread_mutex_unlock() failed");

    return NGX_ERROR;
}