Mercurial > hg > nginx

view auto/install @ 9189:fcec773dd249

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
QUIC: avoid partial expansion of PATH_CHALLENGE/PATH_RESPONSE. By default packets with these frames are expanded to 1200 bytes. Previously, if anti-amplification limit did not allow this expansion, it was limited to whatever size was allowed. However RFC 9000 clearly states no partial expansion should happen in both cases. Section 8.2.1. Initiating Path Validation: An endpoint MUST expand datagrams that contain a PATH_CHALLENGE frame to at least the smallest allowed maximum datagram size of 1200 bytes, unless the anti-amplification limit for the path does not permit sending a datagram of this size. Section 8.2.2. Path Validation Responses: An endpoint MUST expand datagrams that contain a PATH_RESPONSE frame to at least the smallest allowed maximum datagram size of 1200 bytes. ... However, an endpoint MUST NOT expand the datagram containing the PATH_RESPONSE if the resulting data exceeds the anti-amplification limit.
author Roman Arutyunyan <arut@nginx.com>
date Wed, 29 Nov 2023 18:13:25 +0400
parents 549b13cd793b
children
line wrap: on
line source


# Copyright (C) Igor Sysoev
# Copyright (C) Nginx, Inc.


if [ $USE_PERL != NO ]; then

    cat << END                                                >> $NGX_MAKEFILE

install_perl_modules:
	cd $NGX_OBJS/src/http/modules/perl && \$(MAKE) install
END

    NGX_INSTALL_PERL_MODULES=install_perl_modules

fi


case ".$NGX_SBIN_PATH" in
    ./*)
    ;;

    *)
        NGX_SBIN_PATH=$NGX_PREFIX/$NGX_SBIN_PATH
    ;;
esac


case ".$NGX_MODULES_PATH" in
    ./*)
    ;;

    *)
        NGX_MODULES_PATH=$NGX_PREFIX/$NGX_MODULES_PATH
    ;;
esac

NGX_MODULES_PATH=`dirname $NGX_MODULES_PATH/.`


case ".$NGX_CONF_PATH" in
    ./*)
    ;;

    *)
        NGX_CONF_PATH=$NGX_PREFIX/$NGX_CONF_PATH
    ;;
esac


NGX_CONF_PREFIX=`dirname $NGX_CONF_PATH`


case ".$NGX_PID_PATH" in
    ./*)
    ;;

    *)
        NGX_PID_PATH=$NGX_PREFIX/$NGX_PID_PATH
    ;;
esac


case ".$NGX_ERROR_LOG_PATH" in
    ./* | .)
    ;;

    *)
        NGX_ERROR_LOG_PATH=$NGX_PREFIX/$NGX_ERROR_LOG_PATH
    ;;
esac


case ".$NGX_HTTP_LOG_PATH" in
    ./*)
    ;;

    *)
        NGX_HTTP_LOG_PATH=$NGX_PREFIX/$NGX_HTTP_LOG_PATH
    ;;
esac


if test -f man/nginx.8 ; then
    NGX_MAN=man/nginx.8
else
    NGX_MAN=docs/man/nginx.8
fi

if test -d html ; then
    NGX_HTML=html
else
    NGX_HTML=docs/html
fi

cat << END                                                    >> $NGX_MAKEFILE

manpage:	$NGX_OBJS/nginx.8

$NGX_OBJS/nginx.8:	$NGX_MAN $NGX_AUTO_CONFIG_H
	sed -e "s|%%PREFIX%%|$NGX_PREFIX|" \\
		-e "s|%%PID_PATH%%|$NGX_PID_PATH|" \\
		-e "s|%%CONF_PATH%%|$NGX_CONF_PATH|" \\
		-e "s|%%ERROR_LOG_PATH%%|${NGX_ERROR_LOG_PATH:-stderr}|" \\
		< $NGX_MAN > \$@

install:	build $NGX_INSTALL_PERL_MODULES
	test -d '\$(DESTDIR)$NGX_PREFIX' || mkdir -p '\$(DESTDIR)$NGX_PREFIX'

	test -d '\$(DESTDIR)`dirname "$NGX_SBIN_PATH"`' \\
		|| mkdir -p '\$(DESTDIR)`dirname "$NGX_SBIN_PATH"`'
	test ! -f '\$(DESTDIR)$NGX_SBIN_PATH' \\
		|| mv '\$(DESTDIR)$NGX_SBIN_PATH' \\
			'\$(DESTDIR)$NGX_SBIN_PATH.old'
	cp $NGX_OBJS/nginx '\$(DESTDIR)$NGX_SBIN_PATH'

	test -d '\$(DESTDIR)$NGX_CONF_PREFIX' \\
		|| mkdir -p '\$(DESTDIR)$NGX_CONF_PREFIX'

	cp conf/koi-win '\$(DESTDIR)$NGX_CONF_PREFIX'
	cp conf/koi-utf '\$(DESTDIR)$NGX_CONF_PREFIX'
	cp conf/win-utf '\$(DESTDIR)$NGX_CONF_PREFIX'

	test -f '\$(DESTDIR)$NGX_CONF_PREFIX/mime.types' \\
		|| cp conf/mime.types '\$(DESTDIR)$NGX_CONF_PREFIX'
	cp conf/mime.types '\$(DESTDIR)$NGX_CONF_PREFIX/mime.types.default'

	test -f '\$(DESTDIR)$NGX_CONF_PREFIX/fastcgi_params' \\
		|| cp conf/fastcgi_params '\$(DESTDIR)$NGX_CONF_PREFIX'
	cp conf/fastcgi_params \\
		'\$(DESTDIR)$NGX_CONF_PREFIX/fastcgi_params.default'

	test -f '\$(DESTDIR)$NGX_CONF_PREFIX/fastcgi.conf' \\
		|| cp conf/fastcgi.conf '\$(DESTDIR)$NGX_CONF_PREFIX'
	cp conf/fastcgi.conf '\$(DESTDIR)$NGX_CONF_PREFIX/fastcgi.conf.default'

	test -f '\$(DESTDIR)$NGX_CONF_PREFIX/uwsgi_params' \\
		|| cp conf/uwsgi_params '\$(DESTDIR)$NGX_CONF_PREFIX'
	cp conf/uwsgi_params \\
		'\$(DESTDIR)$NGX_CONF_PREFIX/uwsgi_params.default'

	test -f '\$(DESTDIR)$NGX_CONF_PREFIX/scgi_params' \\
		|| cp conf/scgi_params '\$(DESTDIR)$NGX_CONF_PREFIX'
	cp conf/scgi_params \\
		'\$(DESTDIR)$NGX_CONF_PREFIX/scgi_params.default'

	test -f '\$(DESTDIR)$NGX_CONF_PATH' \\
		|| cp conf/nginx.conf '\$(DESTDIR)$NGX_CONF_PATH'
	cp conf/nginx.conf '\$(DESTDIR)$NGX_CONF_PREFIX/nginx.conf.default'

	test -d '\$(DESTDIR)`dirname "$NGX_PID_PATH"`' \\
		|| mkdir -p '\$(DESTDIR)`dirname "$NGX_PID_PATH"`'

	test -d '\$(DESTDIR)`dirname "$NGX_HTTP_LOG_PATH"`' \\
		|| mkdir -p '\$(DESTDIR)`dirname "$NGX_HTTP_LOG_PATH"`'

	test -d '\$(DESTDIR)$NGX_PREFIX/html' \\
		|| cp -R $NGX_HTML '\$(DESTDIR)$NGX_PREFIX'
END


if test -n "$NGX_ERROR_LOG_PATH"; then
    cat << END                                                >> $NGX_MAKEFILE

	test -d '\$(DESTDIR)`dirname "$NGX_ERROR_LOG_PATH"`' \\
		|| mkdir -p '\$(DESTDIR)`dirname "$NGX_ERROR_LOG_PATH"`'
END

fi


if test -n "$DYNAMIC_MODULES"; then
    cat << END                                                >> $NGX_MAKEFILE

	test -d '\$(DESTDIR)$NGX_MODULES_PATH' \\
		|| mkdir -p '\$(DESTDIR)$NGX_MODULES_PATH'
END

fi


for ngx_module in $DYNAMIC_MODULES
do
    ngx_module=$ngx_module$ngx_modext

    cat << END                                                >> $NGX_MAKEFILE

	test ! -f '\$(DESTDIR)$NGX_MODULES_PATH/$ngx_module' \\
		|| mv '\$(DESTDIR)$NGX_MODULES_PATH/$ngx_module' \\
			'\$(DESTDIR)$NGX_MODULES_PATH/$ngx_module.old'
	cp $NGX_OBJS/$ngx_module '\$(DESTDIR)$NGX_MODULES_PATH/$ngx_module'
END

done


# create Makefile

cat << END >> Makefile

build:
	\$(MAKE) -f $NGX_MAKEFILE

install:
	\$(MAKE) -f $NGX_MAKEFILE install

modules:
	\$(MAKE) -f $NGX_MAKEFILE modules

upgrade:
	$NGX_SBIN_PATH -t

	kill -USR2 \`cat $NGX_PID_PATH\`
	sleep 1
	test -f $NGX_PID_PATH.oldbin

	kill -QUIT \`cat $NGX_PID_PATH.oldbin\`

.PHONY:	build install modules upgrade
END