Core Module

# HG changeset patch # User Ruslan Ermilov # Date 1315316584 0 # Node ID a1e1b348bfaf56678ec470326e8dc47b5f84d77f # Parent 9755cb2a39b27ec3c627cd1e33c8d75e680ec6f9 Regenerate after previous commit. diff --git a/docs/html/http/ngx_http_core_module.html b/docs/html/http/ngx_http_core_module.html --- a/docs/html/http/ngx_http_core_module.html +++ b/docs/html/http/ngx_http_core_module.html @@ -9,7 +9,7 @@ Enables or disables the use of asynchronous file I/O (AIO) on FreeBSD and Linux.

-On FreeBSD, AIO is usable used starting from FreeBSD 4.3. +On FreeBSD, AIO is usable starting from FreeBSD 4.3. AIO can either be linked statically into a kernel:

 options VFS_AIO
@@ -21,9 +21,9 @@ kldload aio
 In FreeBSD versions 5 and 6, enabling AIO statically, or dynamically
 when booting the kernel, will cause the entire networking subsystem
 to use the Giant lock that can impact overall performance negatively.
-This limitation has been removed in FreeBSD 6.4-STABLE in 2009, and in
-FreeBSD 7.
-However, starting from FreeBSD 5.3, it's possible to enable AIO
+This limitation has been removed in FreeBSD 6.4-STABLE in 2009, and in
+FreeBSD 7.
+However, starting from FreeBSD 5.3 it is possible to enable AIO
 without the penalty of running the networking subsystem under a
 Giant lock - for this to work, the AIO module needs to be loaded
 after the kernel has booted.
@@ -46,19 +46,19 @@ For AIO to work,
 sendfile
 needs to be disabled:
 -location  /video/ {
-    sendfile        off;
-    aio             on;
-    output_buffers  1 64k;
+location /video/ {
+    sendfile       off;
+    aio            on;
+    output_buffers 1 64k;
 }
 

-In addition, starting from FreeBSD 5.2.1 and nginx 0.8.12, AIO can
+In addition, starting from FreeBSD 5.2.1 and nginx 0.8.12, AIO can
 also be used to pre-load data for sendfile():
 
-location  /video/ {
-    sendfile        on;
-    tcp_nopush      on;
-    aio             sendfile;
+location /video/ {
+    sendfile       on;
+    tcp_nopush     on;
+    aio            sendfile;
 }
 
 In this configuration, sendfile() is called with
@@ -76,17 +76,17 @@ plus, it is also necessary to enable
 directio,
 otherwise reading will be blocking:
 -location  /video/ {
-    aio             on;
-    directio        512;
-    output_buffers  1 128k;
+location /video/ {
+    aio            on;
+    directio       512;
+    output_buffers 1 128k;
 }
 

 On Linux,
 directio
 can only be used for reading blocks that are aligned on 512-byte
 boundaries (or 4K for XFS).
-Reading of unaligned file's tail is still made in blocking mode.
+Reading of unaligned file's end is still made in blocking mode.
 The same holds true for byte range requests, and for FLV requests
 not from the beginning of a file: reading of unaligned data at the
 beginning and end of a file will be blocking.
@@ -102,12 +102,14 @@ is used.
 Defines a replacement for the specified location.
 For example, with the following configuration
 
-location  /i/ {
-    alias  /data/w3/images/;
+location /i/ {
+    alias /data/w3/images/;
 }
 
-the request of "/i/top.gif" will be responded
-with the file "/data/w3/images/top.gif".
+the request of
+“/i/top.gif” will be responded
+with the file
+“/data/w3/images/top.gif”.
 

 The path value can contain variables.
 

@@ -117,21 +119,21 @@ contain captures and alias 
 these captures (0.7.40), for example:
 
 location ~ ^/users/(.+\.(?:gif|jpe?g|png))$ {
-    alias  /data/w3/images/$1;
+    alias /data/w3/images/$1;
 }
 

 When location matches the last part of the directive's value:
 
-location  /images/ {
-    alias  /data/w3/images/;
+location /images/ {
+    alias /data/w3/images/;
 }
 
-it's better to use the
+it is better to use the
 root
 directive instead:
 -location  /images/ {
-    root   /data/w3;
+location /images/ {
+    root /data/w3;
 }
 
syntax:
          client_body_in_file_only
@@ -188,7 +190,7 @@ Up to three-level subdirectory hierarchy
 directory.
 For example, in the following configuration
 -client_body_temp_path  /spool/nginx/client_temp 1 2;
+client_body_temp_path /spool/nginx/client_temp 1 2;
 
 a temporary file might look like this:
 @@ -212,7 +214,7 @@ Sets buffer size for reading client requ
 For most requests, a buffer of 1K bytes is enough.
 However, if a request includes long cookies, or comes from a WAP client,
 it may not fit into 1K.
-If a request line, or a request header line do not fit entirely into
+If a request line, or a request header field do not fit entirely into
 this buffer then larger buffers are allocated, configured by the
 large_client_header_buffers
 directive.
@@ -232,7 +234,7 @@ is returned.
 Sets the maximum allowed size of the client request body,
 specified in the
 Content-Length
-request header line.
+request header field.
 If size is greater than the configured value, the
 "Request Entity Too Large" (413)
 error is returned to a client.
@@ -259,7 +261,7 @@ It automatically disables (0.7.15) the u
 for a given request.
 It could be useful for serving large files:
 -directio  4m;
+directio 4m;
 
 or when using aio on Linux.
 
syntax:
@@ -273,42 +275,44 @@ In most cases, a 512-byte alignment is e
 using XFS under Linux, it needs to be increased to 4K.
 
syntax:
          error_page
-        code ...
+        code ...
         [=[response]]
         uri
default:
       none
context:
       http, server, location, if in location

 Defines the URI that will be shown for the specified errors.
 These directives are inherited from the previous level if and
-only if there are no error_page directives on
+only if there are no
+error_page
+directives on
 the current level.
 A URI value can contain variables.
 

-Example usage:
+Example:
 
-error_page   404          /404.html;
-error_page   502 503 504  /50x.html;
-error_page   403          http://example.com/forbidden.html;
+error_page 404         /404.html;
+error_page 502 503 504 /50x.html;
+error_page 403         http://example.com/forbidden.html;
 

 Furthermore, it is possible to change the response code to another, for example:
 
-error_page   404  =200  /empty.gif;
+error_page 404 =200 /empty.gif;
 

-If an error response is processed by a proxied server, or a FastCGI-server,
+If an error response is processed by a proxied server, or a FastCGI server,
 and the server may return different response codes (e.g., 200, 302, 401
 or 404), it is possible to respond with a returned code:
 
-error_page   404  =  /404.php;
+error_page 404 = /404.php;
 

 If there is no need to change URI during redirection it is possible to redirect
 error processing into a named location:
 
 location / {
-    error_page   404  =  @fallback;
+    error_page 404 = @fallback;
 }
 
 location @fallback {
-    proxy_pass   http://backend;
+    proxy_pass http://backend;
 }
 
syntax:
          if_modified_since
@@ -323,13 +327,16 @@ with the time in the
 If-Modified-Since
 request header:
 
-off - the
+off

+the
 If-Modified-Since request header is ignored (0.7.34);
-
exact - exact match;
-
before - modification time of a response is
+exact

+exact match;
+
before

+modification time of a response is
 less than or equal to the time in the If-Modified-Since
 request header.
-
syntax:
+
syntax:
          internal
default:
       none
context:
       location

@@ -351,11 +358,11 @@ requests changed by the
 directive of the
 http_rewrite module.
 

-Example usage:
+Example:
 
-error_page   404   /404.html;
+error_page 404 /404.html;
 
-location  /404.html {
+location /404.html {
     internal;
 }
 
syntax:
@@ -375,12 +382,12 @@ made through one keep-alive connection.
 The first argument sets a timeout during which a keep-alive
 client connection will stay open on the server side.
 The optional second argument sets a value in the
-"Keep-Alive: timeout=time"
+“Keep-Alive: timeout=time”
 response header.
 Two arguments may differ.
 

 The
-"Keep-Alive: timeout="
+“Keep-Alive: timeout=”
 is understood by Mozilla and Konqueror.
 MSIE will close keep-alive connection in about 60 seconds.
 
syntax:
@@ -392,7 +399,7 @@ buffers used when reading large client r
 A request line cannot exceed the size of one buffer, or the
 "Request URI too large" (414)
 error is returned.
-A request header line cannot exceed the size of one buffer as well, or the
+A request header field cannot exceed the size of one buffer as well, or the
 "Bad request" (400)
 error is returned.
 Buffers are allocated only on demand.
@@ -412,9 +419,9 @@ and
 http_auth_basic
 modules directives:
 -limit_except  GET {
-    allow  192.168.1.0/32;
-    deny   all;
+limit_except GET {
+    allow 192.168.1.0/32;
+    deny  all;
 }
 
 Please note that this will limit access to all methods
@@ -440,7 +447,7 @@ variable:
 server {
 
     if ($slow) {
-        set $limit_rate  4k;
+        set $limit_rate 4k;
     }
 
     ...
@@ -457,8 +464,8 @@ Example:
  location /flv/ {
     flv;
-    limit_rate_after  500k;
-    limit_rate        50k;
+    limit_rate_after 500k;
+    limit_rate       50k;
 }
 
syntax:
          listen
@@ -492,16 +499,16 @@ Only one of address 
 specified.
 An address may also be a hostname, for example:
 -listen  127.0.0.1:8000;
-listen  127.0.0.1;
-listen  8000;
-listen  *:8000;
-listen  localhost:8000;
+listen 127.0.0.1:8000;
+listen 127.0.0.1;
+listen 8000;
+listen *:8000;
+listen localhost:8000;
 
 IPv6 addresses (0.7.36) are specified in square brackets:
 -listen  [::]:8000;
-listen  [fe80::1];
+listen [::]:8000;
+listen [fe80::1];
 

 If only address is given, the port 80 is used.
 

@@ -525,32 +532,32 @@ parameter can have several additional pa
 Starting from version 0.8.21, these parameters can be specified in any
 listen directive, but only once for the given
 address:port pair.
-backlog=number - 
+backlog=number

 sets the backlog parameter in the
 listen() call.
 By default, backlog equals -1 on FreeBSD
 and 511 on other platforms.
-
rcvbuf=size - 
+rcvbuf=size

 sets the SO_RCVBUF parameter for the listening socket.
-
sndbuf=size - 
+sndbuf=size

 sets the SO_SNDBUF parameter for the listening socket.
-
accept_filter=filter - 
+accept_filter=filter

 sets the name of the accept filter.
 This works only on FreeBSD, acceptable values are dataready
 and httpready.
-On receiving SIGHUP signal, an accept filter can only be
+On receipt of the SIGHUP signal, an accept filter can only be
 changed in recent versions of FreeBSD, starting from 6.0, 5.4-STABLE
 and 4.11-STABLE.
-
deferred - 
+deferred

 instructs to use a deferred accept() on Linux
 using the TCP_DEFER_ACCEPT option.
-bind - 
+bind
 specifies to make a separate bind() call for a given
 address:port pair.
 This is because nginx will only bind() to
 *:port
 if there are several listen directives with
-the same port and different addresses, and one of the
+the same port but different addresses, and one of the
 listen directives listens on all addresses
 for the given port (*:port).
 It should be noted that in this case a getsockname()
@@ -561,11 +568,11 @@ If parameters backlog, deferred are used then for a given
 address:port pair
 a separate bind() call will always be made.
-
ipv6only=on|off - 
+ipv6only=on|off

 this parameter (0.7.42) sets the value of the IPV6_V6ONLY
 parameter for the listening socket.
 This parameter can only be set once on start.
-
ssl - 
+ssl

 this parameter (0.7.14) does not relate to system calls
 listen() and bind(), but allows to
 specify that all connections accepted on this port should work in
@@ -573,12 +580,12 @@ the SSL mode.
 This allows for a more compact configuration for the server operating
 in both HTTP and HTTPS modes simultaneously.
 -listen  80;
-listen  443 default ssl;
-

+listen 80;
+listen 443 default ssl;
+

 Example:
 
-listen  127.0.0.1 default accept_filter=dataready backlog=1024;
+listen 127.0.0.1 default accept_filter=dataready backlog=1024;
 
syntax:
          location [
         = |
@@ -593,8 +600,8 @@ listen  127.0.0.1 default accept_filter=
 Sets a configuration based on a request URI.
 A location can either be defined by a prefix string, or by a regular expression.
 Regular expressions are specified by prepending them with the
-"~*" prefix (for case-insensitive matching), or with the
-"~" prefix (for case-sensitive matching).
+“~*” prefix (for case-insensitive matching), or with the
+“~” prefix (for case-sensitive matching).
 To find a location matching a given request, nginx first checks
 locations defined using the prefix strings (prefix locations).
 Amongst them, the most specific one is searched.
@@ -612,29 +619,29 @@ However, comparison is limited to one-by
 Regular expressions can contain captures (0.7.40) that can later
 be used in other directives.
 

-If the most specific prefix location has the "^~" prefix
+If the most specific prefix location has the “^~” prefix
 then regular expressions are not checked.
 

-Also, using the "=" prefix it's possible to define
+Also, using the “=” prefix it is possible to define
 an exact match of URI and location.
 If an exact match is found, the search terminates.
-For example, if a "/" request happens frequently,
-defining "location = /" will speed up the processing
+For example, if a “/” request happens frequently,
+defining “location = /” will speed up the processing
 of these requests, as search terminates right after the first
 comparison.
 

 In versions from 0.7.1 to 0.8.41, if a request matched the prefix
-location without the "=" and "^~"
+location without the “=” and “^~”
 prefixes, the search also terminated and regular expressions were
 not checked.
 

-Let's illustrate the above by an example:
+Let's illustrate the above by example:
 
-location  = / {
+location = / {
     [ configuration A ]
 }
 
-location  / {
+location / {
     [ configuration B ]
 }
 
@@ -646,13 +653,14 @@ location ~* \.(gif|jpg|jpeg)$ {
     [ configuration D ]
 }
 
-The "/" request will match configuration A,
-the "/documents/document.html" request - configuration B,
-the "/images/1.gif" request - configuration C, and
-the "/documents/1.jpg" request - configuration D.
+The “/” request will match configuration A,
+the “/documents/document.html” request will match
+configuration B,
+the “/images/1.gif” request will match configuration C, and
+the “/documents/1.jpg” request will match configuration D.
 

-The "@" prefix defines a named location.
-Such a location isn't used for a regular request processing, but instead
+The “@” prefix defines a named location.
+Such a location is not used for a regular request processing, but instead
 used for request redirection.
 
syntax:
          log_not_found on | off
default:
@@ -675,18 +683,18 @@ in a URI into a single slash.
 

 Note that compression is essential for the correct prefix string
 and regular expressions location matching.
-Without it, the "//scripts/one.php" request would not match
+Without it, the “//scripts/one.php” request would not match
 
 location /scripts/ {
     ...
 }
 
 and might be processed as a static file,
-so it gets converted to "/scripts/one.php".
+so it gets converted to “/scripts/one.php”.
 

 Turning the compression off can become necessary if a URI
 contains base64-encoded names, since base64 uses the "/" character internally.
-However, for security considerations, it's better to avoid turning off
+However, for security considerations, it is better to avoid turning off
 the compression.
 

 If a directive is specified on the
@@ -724,21 +732,23 @@ Caching of errors should be enabled sepa
 directive.
 

 The directive has the following parameters:
-
max - 
+max

 sets the maximum number of elements in the cache;
 on cache overflow the least recently used (LRU) elements get removed;
-
inactive - 
+inactive

 defines a time, after which the element gets removed from the cache
 if there were no accesses to it during this time;
 by default, it is 60 seconds;
-
off - disables the cache.
-

+
off

+disables the cache.
+

 Example:
 
-open_file_cache          max=1000  inactive=20s;
+open_file_cache          max=1000 inactive=20s;
 open_file_cache_valid    30s;
 open_file_cache_min_uses 2;
-open_file_cache_errors   on;
syntax:
+open_file_cache_errors   on;
+

syntax:
          open_file_cache_errors on | off
default:
       open_file_cache_errors off
context:
       http, server, location

@@ -781,7 +791,7 @@ optimization needs to be disabled.
 Enables or disables specifying the port in redirects issued by nginx.
 
syntax:
          read_ahead size
default:
-      read_ahead  0
context:
+      read_ahead 0
context:
       http, server, location

 Sets the amount of pre-reading when working with files, in the kernel.
 

@@ -791,7 +801,7 @@ system call is used, so the siz
 

 On FreeBSD, the
 fcntl(O_READAHEAD,size)
-system call is used, supported in FreeBSD 9.0-CURRENT.
+system call is used, supported in FreeBSD 9.0-CURRENT.
 FreeBSD 7 needs to be
 patched.
 
syntax:
@@ -802,7 +812,8 @@ Enables or disables doing several redire
 error_page
 directive.
 
syntax:
-         reset_timedout_connection on | off
default:
+         reset_timedout_connection
+        on | off
default:
       reset_timedout_connection off
context:
       http, server, location

 Enables or disables resetting of timed out connections.
@@ -822,14 +833,14 @@ closed normally.
       http, server, location

 Sets the address of a name server, for example:
 
-resolver  127.0.0.1;
+resolver 127.0.0.1;
 
syntax:
          resolver_timeout time
default:
       resolver_timeout 30s
context:
       http, server, location

 Sets a timeout for name resolution, for example:
 
-resolver_timeout  5s;
+resolver_timeout 5s;
 
syntax:
          root path
default:
       root html
context:
@@ -837,12 +848,12 @@ resolver_timeout  5s;
 Sets the root directory for requests.
 For example, with the following configuration
 -location  /i/ {
-    root  /data/w3;
+location /i/ {
+    root /data/w3;
 }
-
-the request of "/i/top.gif" will be responded
-with the file "/data/w3/images/top.gif".
+“/i/top.gif” will be responded
+with the file
+“/data/w3/i/top.gif”.
 

 The path value can contain variables.
 

@@ -860,13 +871,13 @@ or http_auth_basic
 modules grant access.
 
 location / {
-    satisfy  any;
+    satisfy any;
 
-    allow  192.168.1.0/32;
-    deny   all;
+    allow 192.168.1.0/32;
+    deny  all;
 
-    auth_basic            "closed site";
-    auth_basic_user_file  conf/htpasswd;
+    auth_basic           "closed site";
+    auth_basic_user_file conf/htpasswd;
 }
 
syntax:
          satisfy_any on | off
default:
@@ -894,7 +905,7 @@ Enables or disables the use of
       http

 Sets a configuration for the virtual server.
 There is no clean separation between IP-based (based on the IP address)
-and name-based (based on the Host header string)
+and name-based (based on the Host request header field)
 virtual servers.
 Instead, the listen directives describe all
 addresses and ports that should accept connections for a server, and the
@@ -903,53 +914,53 @@ An example configuration is provided in 
 
 Setting Up Virtual Servers document.
 
syntax:
-         server_name name ...
default:
+         server_name name ...
default:
       server_name hostname
context:
       server

 Sets names of the virtual server, for example:
 
 server {
-    server_name   example.com  www.example.com;
+    server_name example.com www.example.com;
 }
 

 The first name becomes a primary server name.
 By default, the machine's hostname is used.
-Server names can include an asterisk ("*")
+Server names can include an asterisk (“*”)
 to replace the first or last part of a name:
 
 server {
-    server_name   example.com  *.example.com  www.example.*;
+    server_name example.com *.example.com www.example.*;
 }
 

 The first two of the above mentioned names can be combined:
 
 server {
-    server_name   .example.com;
+    server_name .example.com;
 }
 

 It is also possible to use regular expressions in server names,
-prepending the name with a tilde ("~"):
+prepending the name with a tilde (“~”):
 
 server {
-    server_name   www.example.com   ~^www\d+\.example\.com$;
+    server_name www.example.com ~^www\d+\.example\.com$;
 }
 

 Regular expressions can contain captures (0.7.40) that can later
 be used in other directives:
 
 server {
-    server_name   ~^(www\.)?(.+)$;
+    server_name ~^(www\.)?(.+)$;
 
     location / {
-        root  /sites/$2;
+        root /sites/$2;
     }
 }
 
 server {
-    server_name   _;
+    server_name _;
 
     location / {
-        root  /sites/default;
+        root /sites/default;
     }
 }
 

@@ -957,25 +968,25 @@ Starting from version 0.8.25, named capt
 variables that can later be used in other directives:
 
 server {
-    server_name   ~^(www\.)?(?<domain>.+)$;
+    server_name ~^(www\.)?(?<domain>.+)$;
 
     location / {
-        root  /sites/$domain;
+        root /sites/$domain;
     }
 }
 
 server {
-    server_name   _;
+    server_name _;
 
     location / {
-        root  /sites/default;
+        root /sites/default;
     }
 }
 

-Starting from version 0.7.11, it is possible to specify an empty name "":
+Starting from version 0.7.11, it is possible to specify an empty name:
 
 server {
-    server_name   www.example.com   "";
+    server_name www.example.com "";
 }
 
 It allows this server to process requests without the Host
@@ -985,10 +996,8 @@ The name checking order is as follows:
 
 full names
 

-names with the prefix mask - *.example.com
-

-names with the suffix mask - mail.*
-

+names with the prefix mask, e.g. “*.example.com”

+names with the suffix mask, e.g. “mail.*”

 regular expressions
 
syntax:
          server_name_in_redirect on | off
default:
@@ -997,9 +1006,9 @@ regular expressions
 Enables or disables the use of the primary server name, specified by the
 server_name
 directive, in redirects issued by nginx.
-When disabled, the name from the Host request header string
+When disabled, the name from the Host request header field
 is used.
-If there's no such a string, an IP address of the server is used.
+If this field is not present, an IP address of the server is used.
 
syntax:
          server_names_hash_max_size size
default:
       server_names_hash_max_size 512
context:
@@ -1020,7 +1029,7 @@ For more information, please refer to
       server_tokens on
context:
       http, server, location

 Enables or disables emitting of nginx version in error messages and in the
-Server response header string.
+Server response header field.
 
syntax:
          tcp_nodelay on | off
default:
       tcp_nodelay on
context:
@@ -1043,59 +1052,63 @@ on Linux and FreeBSD 4.*;
 
 send a file in full packets.
 
syntax:
-         try_files file ... uri
       try_files file ... =code
default:
+         try_files
+        file ...
+	uri
       try_files
+        file ...
+        =code
default:
       none
context:
       location

 Checks the existence of files in the specified order, and uses
 the first found file for request processing; the processing
 is performed in this location's context.
 It is possible to check the directory existence by specifying
-the slash at the end of a name, e.g. "$uri/".
+the slash at the end of a name, e.g. “$uri/”.
 If none of the files were found, an internal redirect to the
 uri specified by the last argument is made.
 As of version 0.7.51, the last argument can also be a
 code:
 
 location / {
-    try_files      $uri  $uri/index.html  $uri.html  =404;
+    try_files $uri $uri/index.html $uri.html =404;
 }
 

 Example when proxying Mongrel:
 
 location / {
-    try_files      /system/maintenance.html
-                   $uri  $uri/index.html  $uri.html
-                   @mongrel;
+    try_files /system/maintenance.html
+              $uri $uri/index.html $uri.html
+              @mongrel;
 }
 
 location @mongrel {
-    proxy_pass     http://mongrel;
+    proxy_pass http://mongrel;
 }
 

 Example for Drupal/FastCGI:
 
 location / {
-    try_files      $uri  $uri/  @drupal;
+    try_files $uri $uri/ @drupal;
 }
 
 location ~ \.php$ {
-    try_files      $uri  @drupal;
+    try_files $uri @drupal;
 
-    fastcgi_pass   ...;
+    fastcgi_pass ...;
 
-    fastcgi_param  SCRIPT_FILENAME  /path/to$fastcgi_script_name;
-    fastcgi_param  SCRIPT_NAME      $fastcgi_script_name;
-    fastcgi_param  QUERY_STRING     $args;
+    fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
+    fastcgi_param SCRIPT_NAME     $fastcgi_script_name;
+    fastcgi_param QUERY_STRING    $args;
 
     ... other fastcgi_param's
 }
 
 location @drupal {
-    fastcgi_pass   ...;
+    fastcgi_pass ...;
 
-    fastcgi_param  SCRIPT_FILENAME  /path/to/index.php;
-    fastcgi_param  SCRIPT_NAME      /index.php;
-    fastcgi_param  QUERY_STRING     q=$uri&$args;
+    fastcgi_param SCRIPT_FILENAME /path/to/index.php;
+    fastcgi_param SCRIPT_NAME     /index.php;
+    fastcgi_param QUERY_STRING    q=$uri&$args;
 
     ... other fastcgi_param's
 }
@@ -1103,24 +1116,24 @@ location @drupal {
 In the following example,
  location / {
-    try_files      $uri  $uri/  @drupal;
+    try_files $uri $uri/ @drupal;
 }
 
 the try_files directive is equivalent to
  location / {
-    error_page     404 = @drupal;
-    log_not_found  off;
+    error_page 404 = @drupal;
+    log_not_found off;
 }
 
 And here,
  location ~ \.php$ {
-    try_files      $uri  @drupal;
+    try_files $uri @drupal;
 
-    fastcgi_pass   ...;
+    fastcgi_pass ...;
 
-    fastcgi_param  SCRIPT_FILENAME  /path/to$fastcgi_script_name;
+    fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
 
     ...
 }
@@ -1130,22 +1143,22 @@ before passing the request to the FastCG
 Example for Wordpress and Joomla:
  location / {
-    try_files      $uri  $uri/  @wordpress;
+    try_files $uri $uri/ @wordpress;
 }
 
 location ~ \.php$ {
-    try_files      $uri  @wordpress;
+    try_files $uri @wordpress;
 
-    fastcgi_pass   ...;
+    fastcgi_pass ...;
 
-    fastcgi_param  SCRIPT_FILENAME  /path/to$fastcgi_script_name;
+    fastcgi_param SCRIPT_FILENAME /path/to$fastcgi_script_name;
     ... other fastcgi_param's
 }
 
 location @wordpress {
-    fastcgi_pass   ...;
+    fastcgi_pass ...;
 
-    fastcgi_param  SCRIPT_FILENAME  /path/to/index.php;
+    fastcgi_param SCRIPT_FILENAME /path/to/index.php;
     ... other fastcgi_param's
 }
 
syntax:
@@ -1157,24 +1170,116 @@ Several extensions can map to one type.
 The following mappings are configured by default:
  types {
-    text/html    html;
-    image/gif    gif;
-    image/jpeg   jpg;
+    text/html  html;
+    image/gif  gif;
+    image/jpeg jpg;
 }
 

 A sufficiently full mapping table is distributed with nginx in the
 conf/mime.types file.
 

-To make a particular location emit the "application/octet-stream"
+To make a particular location emit the
+“application/octet-stream”
 MIME type for all requests, try the following:
 
 location /download/ {
-    types         { }
-    default_type  application/octet-stream;
+    types        { }
+    default_type application/octet-stream;
 }
 
syntax:
          underscores_in_headers on | off
default:
       underscores_in_headers off
context:
       http, server

-Enables or disables the use of underscores in client request header strings.
-
+Enables or disables the use of underscores in client request header fields.
+
Embedded Variables
+The http_core module supports embedded variables with names matching
+those of the Apache Server.
+First of all, these are variables representing client request header
+fields, such as, $http_user_agent, $http_cookie,
+and so on.
+It also supports other variables:
+
$args

+arguments in the request line
+
$arg_name

+argument name in the request line
+
$binary_remote_addr

+client address in a binary form, value's length is always 4 bytes
+
$content_length
Content-Length request header field
+
$content_type
Content-Type request header field
+
$cookie_name

+the name cookie
+
$document_root
root directive's value for the current request
+
$document_uri

+same as $uri
$host
Host request header field,
+or the server name matching a request if this field is not present
+
$hostname

+host name
+
$http_name

+the name request header field
+
$is_args
“?” if a request line has arguments,
+or an empty string otherwise
+
$limit_rate

+allows for connection rate limiting
+
$pid

+PID of the worker process
+
$request_method

+request method, usually
+“GET” or “POST”
$remote_addr

+client address
+
$remote_port

+client port
+
$remote_user

+user name supplied with the Basic authentication
+
$realpath_root
root directive's value
+for the current request, with all symbolic links resolved to real paths
+
$request_filename

+file path for the current query, based on the
+root and alias
+directives, and the request URI
+
$request_body

+request body
+
+The variable's value is made available in locations
+processed by the
+proxy_pass
+and
+fastcgi_pass
+directives.
+
$request_body_file

+name of a temporary file with the request body
+
+At the end of processing, the file needs to be removed.
+To always write a request body to a file,
+client_body_in_file_only on
+needs be specified.
+When passing the name of a temporary file in a proxied request,
+or in a request to a FastCGI server,
+passing of the request body should be disabled by the
+proxy_pass_request_body
+and
+fastcgi_pass_request_body
+directives, respectively.
+
$request_uri

+full original request URI (with arguments)
+
$query_string

+same as $args
$scheme

+request scheme, “http” or “https>”
$server_protocol

+request protocol, usually
+“HTTP/1.0”
+or
+“HTTP/1.1”
$server_addr

+an address of the server which accepted a request
+
+Computing a value of this variable usually requires one system call.
+To avoid a system call, the listen directives
+must specify addresses and use the bind parameter
+
$server_name

+name of the server which accepted a request
+
$server_port

+port of the server which accepted a request
+
$uri

+current URI in request
+
+It may differ from an original, e.g. when doing internal redirects,
+or when using index files.
+

diff --git a/docs/html/ngx_core_module.html b/docs/html/ngx_core_module.html
--- a/docs/html/ngx_core_module.html
+++ b/docs/html/ngx_core_module.html
@@ -1,12 +1,12 @@
 Core ModuleExample Configuration
-user               www  www;
-worker_processes   2;
+user www www;
+worker_processes 2;
 
-error_log   /var/log/nginx-error.log  info;
+error_log /var/log/nginx-error.log info;
 
 events {
-    use    kqueue;
-    worker_connections   2048;
+    use kqueue;
+    worker_connections 2048;
 }
 
 ...
@@ -33,7 +33,7 @@ module;
 
 use of variables by worker processes.
 Please bear in mind that controlling system libraries in this way
-isn't always possible as it's not uncommon for libraries to check
+is not always possible as it is not uncommon for libraries to check
 variables only during initialization, well before they can be set
 using this directive.
 An exception from this is an above mentioned
@@ -46,9 +46,9 @@ module, unless configured explicitly.
 

 Usage example:
 
-env  MALLOC_OPTIONS;
-env  PERL5LIB=/data/site/modules;
-env  OPENSSL_ALLOW_PROXY_CERTS=1;
+env MALLOC_OPTIONS;
+env PERL5LIB=/data/site/modules;
+env OPENSSL_ALLOW_PROXY_CERTS=1;
 
syntax:
          include file | mask
default:
       none
context:
@@ -60,8 +60,8 @@ syntactically correct directives and blo
 

 Usage example:
 
-include  mime.types;
-include  vhosts/*.conf;
+include mime.types;
+include vhosts/*.conf;
 
syntax:
          master_process on | off
default:
       master_process on
context:
@@ -99,7 +99,7 @@ called once per specified inter
 

 Example:
 
-timer_resolution   100ms;
+timer_resolution 100ms;
 

 An internal implementation of interval depends on the method used:
 

@@ -132,7 +132,7 @@ Allowed range normally varies from -20 t
 

 Example:
 
-worker_priority  -10;
+worker_priority -10;
 
syntax:
          worker_processes number
default:
       worker_processes 1
context:
@@ -143,7 +143,7 @@ Defines the number of worker processes.
       none
context:
       main

 Defines a current working directory for a worker process.
-It's primarily used for writing a core-file, in which case
+It is primarily used when writing a core-file, in which case
 a working process should have write permission for the
 specified directory.