view src/core/ngx_md5.c @ 6250:0256738454dc

Increased the default number of output buffers. Since an output buffer can only be used for either reading or sending, small amounts of data left from the previous operation (due to some limits) must be sent before nginx will be able to read further into the buffer. Using only one output buffer can result in suboptimal behavior that manifests itself in forming and sending too small chunks of data. This is particularly painful with SPDY (or HTTP/2) where each such chunk needs to be prefixed with some header. The default flow-control window in HTTP/2 is 64k minus one bytes. With one 32k output buffer this results is one byte left after exhausting the window. With two 32k buffers the data will be read into the second free buffer before sending, thus the minimum output is increased to 32k + 1 bytes which is much better.
author Valentin Bartenev <vbart@nginx.com>
date Tue, 15 Sep 2015 17:49:15 +0300
parents 21167183825d
children 9eefb38f0005
line wrap: on
line source


/*
 * An internal implementation, based on Alexander Peslyak's
 * public domain implementation:
 * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
 * It is not expected to be optimal and is used only
 * if no MD5 implementation was found in system.
 */


#include <ngx_config.h>
#include <ngx_core.h>
#include <ngx_md5.h>


#if !(NGX_HAVE_MD5)

static const u_char *ngx_md5_body(ngx_md5_t *ctx, const u_char *data,
    size_t size);


void
ngx_md5_init(ngx_md5_t *ctx)
{
    ctx->a = 0x67452301;
    ctx->b = 0xefcdab89;
    ctx->c = 0x98badcfe;
    ctx->d = 0x10325476;

    ctx->bytes = 0;
}


void
ngx_md5_update(ngx_md5_t *ctx, const void *data, size_t size)
{
    size_t  used, free;

    used = (size_t) (ctx->bytes & 0x3f);
    ctx->bytes += size;

    if (used) {
        free = 64 - used;

        if (size < free) {
            ngx_memcpy(&ctx->buffer[used], data, size);
            return;
        }

        ngx_memcpy(&ctx->buffer[used], data, free);
        data = (u_char *) data + free;
        size -= free;
        (void) ngx_md5_body(ctx, ctx->buffer, 64);
    }

    if (size >= 64) {
        data = ngx_md5_body(ctx, data, size & ~(size_t) 0x3f);
        size &= 0x3f;
    }

    ngx_memcpy(ctx->buffer, data, size);
}


void
ngx_md5_final(u_char result[16], ngx_md5_t *ctx)
{
    size_t  used, free;

    used = (size_t) (ctx->bytes & 0x3f);

    ctx->buffer[used++] = 0x80;

    free = 64 - used;

    if (free < 8) {
        ngx_memzero(&ctx->buffer[used], free);
        (void) ngx_md5_body(ctx, ctx->buffer, 64);
        used = 0;
        free = 64;
    }

    ngx_memzero(&ctx->buffer[used], free - 8);

    ctx->bytes <<= 3;
    ctx->buffer[56] = (u_char) ctx->bytes;
    ctx->buffer[57] = (u_char) (ctx->bytes >> 8);
    ctx->buffer[58] = (u_char) (ctx->bytes >> 16);
    ctx->buffer[59] = (u_char) (ctx->bytes >> 24);
    ctx->buffer[60] = (u_char) (ctx->bytes >> 32);
    ctx->buffer[61] = (u_char) (ctx->bytes >> 40);
    ctx->buffer[62] = (u_char) (ctx->bytes >> 48);
    ctx->buffer[63] = (u_char) (ctx->bytes >> 56);

    (void) ngx_md5_body(ctx, ctx->buffer, 64);

    result[0] = (u_char) ctx->a;
    result[1] = (u_char) (ctx->a >> 8);
    result[2] = (u_char) (ctx->a >> 16);
    result[3] = (u_char) (ctx->a >> 24);
    result[4] = (u_char) ctx->b;
    result[5] = (u_char) (ctx->b >> 8);
    result[6] = (u_char) (ctx->b >> 16);
    result[7] = (u_char) (ctx->b >> 24);
    result[8] = (u_char) ctx->c;
    result[9] = (u_char) (ctx->c >> 8);
    result[10] = (u_char) (ctx->c >> 16);
    result[11] = (u_char) (ctx->c >> 24);
    result[12] = (u_char) ctx->d;
    result[13] = (u_char) (ctx->d >> 8);
    result[14] = (u_char) (ctx->d >> 16);
    result[15] = (u_char) (ctx->d >> 24);

    ngx_memzero(ctx, sizeof(*ctx));
}


/*
 * The basic MD5 functions.
 *
 * F and G are optimized compared to their RFC 1321 definitions for
 * architectures that lack an AND-NOT instruction, just like in
 * Colin Plumb's implementation.
 */

#define F(x, y, z)  ((z) ^ ((x) & ((y) ^ (z))))
#define G(x, y, z)  ((y) ^ ((z) & ((x) ^ (y))))
#define H(x, y, z)  ((x) ^ (y) ^ (z))
#define I(x, y, z)  ((y) ^ ((x) | ~(z)))

/*
 * The MD5 transformation for all four rounds.
 */

#define STEP(f, a, b, c, d, x, t, s)                                          \
    (a) += f((b), (c), (d)) + (x) + (t);                                      \
    (a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s))));                \
    (a) += (b)

/*
 * SET() reads 4 input bytes in little-endian byte order and stores them
 * in a properly aligned word in host byte order.
 *
 * The check for little-endian architectures that tolerate unaligned
 * memory accesses is just an optimization.  Nothing will break if it
 * does not work.
 */

#if (NGX_HAVE_LITTLE_ENDIAN && NGX_HAVE_NONALIGNED)

#define SET(n)      (*(uint32_t *) &p[n * 4])
#define GET(n)      (*(uint32_t *) &p[n * 4])

#else

#define SET(n)                                                                \
    (block[n] =                                                               \
    (uint32_t) p[n * 4] |                                                     \
    ((uint32_t) p[n * 4 + 1] << 8) |                                          \
    ((uint32_t) p[n * 4 + 2] << 16) |                                         \
    ((uint32_t) p[n * 4 + 3] << 24))

#define GET(n)      block[n]

#endif


/*
 * This processes one or more 64-byte data blocks, but does not update
 * the bit counters.  There are no alignment requirements.
 */

static const u_char *
ngx_md5_body(ngx_md5_t *ctx, const u_char *data, size_t size)
{
    uint32_t       a, b, c, d;
    uint32_t       saved_a, saved_b, saved_c, saved_d;
    const u_char  *p;
#if !(NGX_HAVE_LITTLE_ENDIAN && NGX_HAVE_NONALIGNED)
    uint32_t       block[16];
#endif

    p = data;

    a = ctx->a;
    b = ctx->b;
    c = ctx->c;
    d = ctx->d;

    do {
        saved_a = a;
        saved_b = b;
        saved_c = c;
        saved_d = d;

        /* Round 1 */

        STEP(F, a, b, c, d, SET(0),  0xd76aa478, 7);
        STEP(F, d, a, b, c, SET(1),  0xe8c7b756, 12);
        STEP(F, c, d, a, b, SET(2),  0x242070db, 17);
        STEP(F, b, c, d, a, SET(3),  0xc1bdceee, 22);
        STEP(F, a, b, c, d, SET(4),  0xf57c0faf, 7);
        STEP(F, d, a, b, c, SET(5),  0x4787c62a, 12);
        STEP(F, c, d, a, b, SET(6),  0xa8304613, 17);
        STEP(F, b, c, d, a, SET(7),  0xfd469501, 22);
        STEP(F, a, b, c, d, SET(8),  0x698098d8, 7);
        STEP(F, d, a, b, c, SET(9),  0x8b44f7af, 12);
        STEP(F, c, d, a, b, SET(10), 0xffff5bb1, 17);
        STEP(F, b, c, d, a, SET(11), 0x895cd7be, 22);
        STEP(F, a, b, c, d, SET(12), 0x6b901122, 7);
        STEP(F, d, a, b, c, SET(13), 0xfd987193, 12);
        STEP(F, c, d, a, b, SET(14), 0xa679438e, 17);
        STEP(F, b, c, d, a, SET(15), 0x49b40821, 22);

        /* Round 2 */

        STEP(G, a, b, c, d, GET(1),  0xf61e2562, 5);
        STEP(G, d, a, b, c, GET(6),  0xc040b340, 9);
        STEP(G, c, d, a, b, GET(11), 0x265e5a51, 14);
        STEP(G, b, c, d, a, GET(0),  0xe9b6c7aa, 20);
        STEP(G, a, b, c, d, GET(5),  0xd62f105d, 5);
        STEP(G, d, a, b, c, GET(10), 0x02441453, 9);
        STEP(G, c, d, a, b, GET(15), 0xd8a1e681, 14);
        STEP(G, b, c, d, a, GET(4),  0xe7d3fbc8, 20);
        STEP(G, a, b, c, d, GET(9),  0x21e1cde6, 5);
        STEP(G, d, a, b, c, GET(14), 0xc33707d6, 9);
        STEP(G, c, d, a, b, GET(3),  0xf4d50d87, 14);
        STEP(G, b, c, d, a, GET(8),  0x455a14ed, 20);
        STEP(G, a, b, c, d, GET(13), 0xa9e3e905, 5);
        STEP(G, d, a, b, c, GET(2),  0xfcefa3f8, 9);
        STEP(G, c, d, a, b, GET(7),  0x676f02d9, 14);
        STEP(G, b, c, d, a, GET(12), 0x8d2a4c8a, 20);

        /* Round 3 */

        STEP(H, a, b, c, d, GET(5),  0xfffa3942, 4);
        STEP(H, d, a, b, c, GET(8),  0x8771f681, 11);
        STEP(H, c, d, a, b, GET(11), 0x6d9d6122, 16);
        STEP(H, b, c, d, a, GET(14), 0xfde5380c, 23);
        STEP(H, a, b, c, d, GET(1),  0xa4beea44, 4);
        STEP(H, d, a, b, c, GET(4),  0x4bdecfa9, 11);
        STEP(H, c, d, a, b, GET(7),  0xf6bb4b60, 16);
        STEP(H, b, c, d, a, GET(10), 0xbebfbc70, 23);
        STEP(H, a, b, c, d, GET(13), 0x289b7ec6, 4);
        STEP(H, d, a, b, c, GET(0),  0xeaa127fa, 11);
        STEP(H, c, d, a, b, GET(3),  0xd4ef3085, 16);
        STEP(H, b, c, d, a, GET(6),  0x04881d05, 23);
        STEP(H, a, b, c, d, GET(9),  0xd9d4d039, 4);
        STEP(H, d, a, b, c, GET(12), 0xe6db99e5, 11);
        STEP(H, c, d, a, b, GET(15), 0x1fa27cf8, 16);
        STEP(H, b, c, d, a, GET(2),  0xc4ac5665, 23);

        /* Round 4 */

        STEP(I, a, b, c, d, GET(0),  0xf4292244, 6);
        STEP(I, d, a, b, c, GET(7),  0x432aff97, 10);
        STEP(I, c, d, a, b, GET(14), 0xab9423a7, 15);
        STEP(I, b, c, d, a, GET(5),  0xfc93a039, 21);
        STEP(I, a, b, c, d, GET(12), 0x655b59c3, 6);
        STEP(I, d, a, b, c, GET(3),  0x8f0ccc92, 10);
        STEP(I, c, d, a, b, GET(10), 0xffeff47d, 15);
        STEP(I, b, c, d, a, GET(1),  0x85845dd1, 21);
        STEP(I, a, b, c, d, GET(8),  0x6fa87e4f, 6);
        STEP(I, d, a, b, c, GET(15), 0xfe2ce6e0, 10);
        STEP(I, c, d, a, b, GET(6),  0xa3014314, 15);
        STEP(I, b, c, d, a, GET(13), 0x4e0811a1, 21);
        STEP(I, a, b, c, d, GET(4),  0xf7537e82, 6);
        STEP(I, d, a, b, c, GET(11), 0xbd3af235, 10);
        STEP(I, c, d, a, b, GET(2),  0x2ad7d2bb, 15);
        STEP(I, b, c, d, a, GET(9),  0xeb86d391, 21);

        a += saved_a;
        b += saved_b;
        c += saved_c;
        d += saved_d;

        p += 64;

    } while (size -= 64);

    ctx->a = a;
    ctx->b = b;
    ctx->c = c;
    ctx->d = d;

    return p;
}

#endif