view man/nginx.8 @ 638:692f4d4d7f10 NGINX_1_0_9

nginx 1.0.9 *) Change: now the 0x7F-0x1F characters are escaped as \xXX in an access_log. *) Change: now SIGWINCH signal works only in daemon mode. *) Feature: "proxy/fastcgi/scgi/uwsgi_ignore_headers" directives support the following additional values: X-Accel-Limit-Rate, X-Accel-Buffering, X-Accel-Charset. *) Feature: decrease of memory consumption if SSL is used. *) Feature: accept filters are now supported on NetBSD. *) Feature: the "uwsgi_buffering" and "scgi_buffering" directives. Thanks to Peter Smit. *) Bugfix: a segmentation fault occurred on start or while reconfiguration if the "ssl" directive was used at http level and there was no "ssl_certificate" defined. *) Bugfix: some UTF-8 characters were processed incorrectly. Thanks to Alexey Kuts. *) Bugfix: the ngx_http_rewrite_module directives specified at "server" level were executed twice if no matching locations were defined. *) Bugfix: a socket leak might occurred if "aio sendfile" was used. *) Bugfix: connections with fast clients might be closed after send_timeout if file AIO was used. *) Bugfix: in the ngx_http_autoindex_module. *) Bugfix: the module ngx_http_mp4_module did not support seeking on 32-bit platforms. *) Bugfix: non-cacheable responses might be cached if "proxy_cache_bypass" directive was used. Thanks to John Ferlito. *) Bugfix: cached responses with an empty body were returned incorrectly; the bug had appeared in 0.8.31. *) Bugfix: 201 responses of the ngx_http_dav_module were incorrect; the bug had appeared in 0.8.32. *) Bugfix: in the "return" directive. *) Bugfix: the "ssl_verify_client", "ssl_verify_depth", and "ssl_prefer_server_ciphers" directives might work incorrectly if SNI was used.
author Igor Sysoev <http://sysoev.ru>
date Tue, 01 Nov 2011 00:00:00 +0400
parents 428c6e58046a
children 1b80544421e8
line wrap: on
line source

.\"
.\" Copyright (c) 2010 Sergey A. Osokin
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"
.Dd November 14, 2010
.Dt NGINX 8
.Os
.Sh NAME
.Nm nginx
.Nd "HTTP and reverse proxy server, mail proxy server"
.Sh SYNOPSIS
.Nm
.Op Fl hqtvV?
.Op Fl c Ar file
.Op Fl g Ar directives
.Op Fl p Ar prefix
.Op Fl s Ar signal
.Sh DESCRIPTION
The
.Nm
(spelled
.Dq engine x )
is an HTTP and reverse proxy server, as well as a mail proxy server.
The
.Nm
is known for its high performance, stability, rich feature set, simple
configuration, and low resource consumption.
.Pp
The options are as follows:
.Bl -tag -width ".Fl d Ar directives"
.It Fl ?\& | h
Print help.
.It Fl c Ar file
Use an alternative configuration
.Ar file .
.It Fl g Ar directives
Set global configuration directives.
See
.Sx EXAMPLES
for details.
.It Fl p Ar prefix
Set prefix path.
Default value is
.Pa %%PREFIX%% .
.It Fl q
Suppress non-error messages during configuration testing.
.It Fl s Ar signal
Send signal to the master process.
The argument
.Ar signal
can be one of:
.Cm stop , quit , reopen , reload .
The following table shows the corresponding system signals.
.Pp
.Bl -tag -width ".It Cm reopen" -compact
.It Cm stop
.Dv SIGTERM
.It Cm quit
.Dv SIGQUIT
.It Cm reopen
.Dv SIGUSR1
.It Cm reload
.Dv SIGHUP
.El
.It Fl t
Don't run, just test the configuration file.
The
.Nm
checks configuration for correct syntax and then tries to open files
referred in configuration.
.It Fl v
Print
.Nm
version.
.It Fl V
Print
.Nm
version, compiler version and
.Pa configure
script parameters.
.El
.Sh SIGNALS
The master process of
.Nm
can handle the following signals.
.Pp
.Bl -tag -width ".It Dv SIGINT , SIGTERM" -compact
.It Dv SIGINT , SIGTERM
Shut down quickly.
.It Dv SIGHUP
Reload configuration, start the new worker process with a new
configuration, gracefully shut down old worker processes.
.It Dv SIGQUIT
Shut down gracefully.
.It Dv SIGUSR1
Reopen log files.
.It Dv SIGUSR2
Upgrade
.Nm
executable on the fly.
.It Dv SIGWINCH
Shut down gracefully worker processes.
.El
.Pp
While there's no need to explicitly control worker processes normally,
they support some signals, too:
.Pp
.Bl -tag -width ".It Dv SIGINT , SIGTERM" -compact
.It Dv SIGTERM
Shut down quickly.
.It Dv SIGQUIT
Shut down gracefully.
.It Dv SIGUSR1
Reopen log files.
.El
.Sh DEBUGGING LOG
To enable a debugging log, reconfigure
.Nm
to build with debugging:
.Pp
.Dl "./configure --with-debug ..."
.Pp
and then set the
.Cm debug
level of the
.Va error_log :
.Pp
.Dl "error_log /path/to/log debug;"
.Pp
It is also possible to enable the debugging for some IP address:
.Bd -literal -offset indent
events {
	debug_connection 127.0.0.1;
}
.Ed
.Sh FILES
.Bl -tag -width indent -compact
.It Pa %%PID_PATH%%
Contains the process ID of the
.Nm
listening for connections.
The content of this file is not sensitive; it can be world-readable.
.It Pa %%CONF_PATH%%
Main configuration file.
.It Pa %%ERROR_LOG_PATH%%
Error log file.
.El
.Sh EXIT STATUS
Exit status is 0 on success, or 1 if the command fails.
.Sh EXAMPLES
.Bd -literal
nginx -t -c ~/mynginx.conf -g "pid /var/run/mynginx.pid; worker_processes 2;"
.Ed
Test configuration file
.Pa ~/mynginx.conf
with global directives for PID and quantity of worker processes.
.Sh SEE ALSO
.Xr nginx.conf 5
.Sh HISTORY
Development of
.Nm
started in 2002, with the first public release on October 4, 2004.
.Sh AUTHORS
.An Igor Sysoev Aq igor@sysoev.ru
.Pp
Documentation available on
.Pa http://nginx.org/
and
.Pa http://sysoev.ru/nginx/ .
.Pp
This manual page was written by
.An Sergey A. Osokin Aq osa@FreeBSD.org.ru
as a result of compilation of many
.Nm
documents all over the world.
.Sh BUGS
Report to mailing list
.Aq Li nginx@nginx.org
if you found one.