Mercurial > hg > nginx-tests
view ssl_stapling.t @ 1619:436d0ffc2ea3
Tests: correctly shutdown ssl for reproducible session reuse tests.
Previously, session reuse tests in stream_ssl_certificate.t were prone
to testing errors, since the client doesn't write any application data
before closing a connection, which is done so to pass tests on win32.
In this case, the server may happened to get an unexpected eof meaning
that it will abandon that session. This is specific to stream testing
pattern, changes to ssl_certificate.t are applied too for consistency.
This is also specific to SSL_R_UNEXPECTED_EOF_WHILE_READING, which is
implemented in OpenSSL 3.0.0.
author | Sergey Kandaurov <pluknet@nginx.com> |
---|---|
date | Mon, 23 Nov 2020 22:46:06 +0000 |
parents | dbce8fb5f5f8 |
children | 2d371452658c |
line wrap: on
line source
#!/usr/bin/perl # (C) Sergey Kandaurov # (C) Nginx, Inc. # Tests for OCSP stapling. ############################################################################### use warnings; use strict; use Test::More; use MIME::Base64 qw/ decode_base64 /; BEGIN { use FindBin; chdir($FindBin::Bin); } use lib 'lib'; use Test::Nginx; ############################################################################### select STDERR; $| = 1; select STDOUT; $| = 1; eval { require Net::SSLeay; Net::SSLeay::load_error_strings(); Net::SSLeay::SSLeay_add_ssl_algorithms(); Net::SSLeay::randomize(); Net::SSLeay::SSLeay(); defined &Net::SSLeay::set_tlsext_status_type or die; }; plan(skip_all => 'Net::SSLeay not installed or too old') if $@; my $t = Test::Nginx->new()->has(qw/http http_ssl/)->has_daemon('openssl'); plan(skip_all => 'no OCSP stapling') if $t->has_module('BoringSSL'); $t->plan(9)->write_file_expand('nginx.conf', <<'EOF'); %%TEST_GLOBALS%% daemon off; events { } http { %%TEST_GLOBALS_HTTP%% ssl_stapling on; ssl_trusted_certificate trusted.crt; ssl_certificate ec-end-int.crt; ssl_certificate_key ec-end.key; ssl_certificate end-int.crt; ssl_certificate_key end.key; ssl_ciphers DEFAULT:ECCdraft; server { listen 127.0.0.1:8443 ssl; listen 127.0.0.1:8080; server_name localhost; } server { listen 127.0.0.1:8444 ssl; server_name localhost; ssl_stapling_responder http://127.0.0.1:8081/; } server { listen 127.0.0.1:8445 ssl; server_name localhost; ssl_stapling_verify on; } server { listen 127.0.0.1:8446 ssl; server_name localhost; ssl_certificate ec-end.crt; ssl_certificate_key ec-end.key; } server { listen 127.0.0.1:8447 ssl; server_name localhost; ssl_certificate end-int.crt; ssl_certificate_key end.key; ssl_stapling_file %%TESTDIR%%/resp.der; } server { listen 127.0.0.1:8448 ssl; server_name localhost; ssl_certificate ec-end-int.crt; ssl_certificate_key ec-end.key; ssl_stapling_file %%TESTDIR%%/ec-resp.der; } server { listen 127.0.0.1:8449 ssl; server_name localhost; ssl_stapling_responder http://127.0.0.1:8080/; } } EOF my $d = $t->testdir(); my $p = port(8081); $t->write_file('openssl.conf', <<EOF); [ req ] default_bits = 2048 encrypt_key = no distinguished_name = req_distinguished_name [ req_distinguished_name ] EOF $t->write_file('ca.conf', <<EOF); [ ca ] default_ca = myca [ myca ] new_certs_dir = $d database = $d/certindex default_md = sha256 policy = myca_policy serial = $d/certserial default_days = 1 x509_extensions = myca_extensions [ myca_policy ] commonName = supplied [ myca_extensions ] basicConstraints = critical,CA:TRUE authorityInfoAccess = OCSP;URI:http://127.0.0.1:$p EOF foreach my $name ('root') { system('openssl req -x509 -new ' . "-config $d/openssl.conf -subj /CN=$name/ " . "-out $d/$name.crt -keyout $d/$name.key " . ">>$d/openssl.out 2>&1") == 0 or die "Can't create certificate for $name: $!\n"; } foreach my $name ('int', 'end') { system("openssl req -new " . "-config $d/openssl.conf -subj /CN=$name/ " . "-out $d/$name.csr -keyout $d/$name.key " . ">>$d/openssl.out 2>&1") == 0 or die "Can't create certificate for $name: $!\n"; } foreach my $name ('ec-end') { system("openssl ecparam -genkey -out $d/$name.key -name prime256v1 " . ">>$d/openssl.out 2>&1") == 0 or die "Can't create EC param: $!\n"; system("openssl req -new -key $d/$name.key " . "-config $d/openssl.conf -subj /CN=$name/ " . "-out $d/$name.csr " . ">>$d/openssl.out 2>&1") == 0 or die "Can't create certificate for $name: $!\n"; } $t->write_file('certserial', '1000'); $t->write_file('certindex', ''); system("openssl ca -batch -config $d/ca.conf " . "-keyfile $d/root.key -cert $d/root.crt " . "-subj /CN=int/ -in $d/int.csr -out $d/int.crt " . ">>$d/openssl.out 2>&1") == 0 or die "Can't sign certificate for int: $!\n"; system("openssl ca -batch -config $d/ca.conf " . "-keyfile $d/int.key -cert $d/int.crt " . "-subj /CN=ec-end/ -in $d/ec-end.csr -out $d/ec-end.crt " . ">>$d/openssl.out 2>&1") == 0 or die "Can't sign certificate for ec-end: $!\n"; system("openssl ca -batch -config $d/ca.conf " . "-keyfile $d/int.key -cert $d/int.crt " . "-subj /CN=end/ -in $d/end.csr -out $d/end.crt " . ">>$d/openssl.out 2>&1") == 0 or die "Can't sign certificate for end: $!\n"; # RFC 6960, serialNumber system("openssl x509 -in $d/end.crt -serial -noout " . ">>$d/serial 2>>$d/openssl.out") == 0 or die "Can't obtain serial for end: $!\n"; my $serial = pack("n2", 0x0202, hex $1) if $t->read_file('serial') =~ /(\d+)/; system("openssl ca -config $d/ca.conf -revoke $d/end.crt " . "-keyfile $d/root.key -cert $d/root.crt " . ">>$d/openssl.out 2>&1") == 0 or die "Can't revoke end.crt: $!\n"; system("openssl ocsp -issuer $d/int.crt -cert $d/end.crt " . "-reqout $d/req.der >>$d/openssl.out 2>&1") == 0 or die "Can't create OCSP request: $!\n"; system("openssl ocsp -index $d/certindex -CA $d/int.crt " . "-rsigner $d/root.crt -rkey $d/root.key " . "-reqin $d/req.der -respout $d/resp.der -ndays 1 " . ">>$d/openssl.out 2>&1") == 0 or die "Can't create OCSP response: $!\n"; system("openssl ocsp -issuer $d/int.crt -cert $d/ec-end.crt " . "-reqout $d/ec-req.der >>$d/openssl.out 2>&1") == 0 or die "Can't create EC OCSP request: $!\n"; system("openssl ocsp -index $d/certindex -CA $d/int.crt " . "-rsigner $d/root.crt -rkey $d/root.key " . "-reqin $d/ec-req.der -respout $d/ec-resp.der -ndays 1 " . ">>$d/openssl.out 2>&1") == 0 or die "Can't create EC OCSP response: $!\n"; $t->write_file('trusted.crt', $t->read_file('int.crt') . $t->read_file('root.crt')); $t->write_file('end-int.crt', $t->read_file('end.crt') . $t->read_file('int.crt')); $t->write_file('ec-end-int.crt', $t->read_file('ec-end.crt') . $t->read_file('int.crt')); $t->run_daemon(\&http_daemon, $t); $t->run(); $t->waitforsocket("127.0.0.1:" . port(8081)); ############################################################################### my $version = get_version(); staple(8443, 'RSA'); staple(8443, 'ECDSA'); staple(8444, 'RSA'); staple(8444, 'ECDSA'); staple(8445, 'ECDSA'); staple(8446, 'ECDSA'); staple(8449, 'ECDSA'); sleep 1; ok(!staple(8443, 'RSA'), 'staple revoked'); ok(staple(8443, 'ECDSA'), 'staple success'); ok(!staple(8444, 'RSA'), 'responder revoked'); ok(staple(8444, 'ECDSA'), 'responder success'); ok(!staple(8445, 'ECDSA'), 'verify - root not trusted'); ok(staple(8446, 'ECDSA', "$d/int.crt"), 'cert store'); is(staple(8447, 'RSA'), '1 1', 'file revoked'); is(staple(8448, 'ECDSA'), '1 0', 'file success'); ok(!staple(8449, 'ECDSA'), 'ocsp error'); ############################################################################### sub staple { my ($port, $ciphers, $ca) = @_; my (@resp); my $staple_cb = sub { my ($ssl, $resp) = @_; push @resp, !!$resp; return 1 unless $resp; my $cert = Net::SSLeay::get_peer_certificate($ssl); my $certid = eval { Net::SSLeay::OCSP_cert2ids($ssl, $cert) } or do { die "no OCSP_CERTID for certificate: $@"; }; my @res = Net::SSLeay::OCSP_response_results($resp, $certid); push @resp, $res[0][2]->{'statusType'}; }; my $s; eval { local $SIG{ALRM} = sub { die "timeout\n" }; local $SIG{PIPE} = sub { die "sigpipe\n" }; alarm(8); $s = IO::Socket::INET->new('127.0.0.1:' . port($port)); alarm(0); }; alarm(0); if ($@) { log_in("died: $@"); return undef; } my $ctx = Net::SSLeay::CTX_new() or die("Failed to create SSL_CTX $!"); my $ssleay = Net::SSLeay::SSLeay(); if ($ssleay < 0x1000200f || $ssleay == 0x20000000) { Net::SSLeay::CTX_set_cipher_list($ctx, $ciphers) or die("Failed to set cipher list"); } else { # SSL_CTRL_SET_SIGALGS_LIST $ciphers = 'PSS' if $ciphers eq 'RSA' && $version > 0x0303; Net::SSLeay::CTX_ctrl($ctx, 98, 0, $ciphers . '+SHA256') or die("Failed to set sigalgs"); } Net::SSLeay::CTX_load_verify_locations($ctx, $ca || '', ''); Net::SSLeay::CTX_set_tlsext_status_cb($ctx, $staple_cb); my $ssl = Net::SSLeay::new($ctx) or die("Failed to create SSL $!"); Net::SSLeay::set_tlsext_status_type($ssl, Net::SSLeay::TLSEXT_STATUSTYPE_ocsp()); Net::SSLeay::set_fd($ssl, fileno($s)); Net::SSLeay::connect($ssl) or die("ssl connect"); return join ' ', @resp; } sub get_version { my $s; eval { local $SIG{ALRM} = sub { die "timeout\n" }; local $SIG{PIPE} = sub { die "sigpipe\n" }; alarm(8); $s = IO::Socket::INET->new('127.0.0.1:' . port(8443)); alarm(0); }; alarm(0); if ($@) { log_in("died: $@"); return undef; } my $ctx = Net::SSLeay::CTX_new() or die("Failed to create SSL_CTX $!"); my $ssl = Net::SSLeay::new($ctx) or die("Failed to create SSL $!"); Net::SSLeay::set_fd($ssl, fileno($s)); Net::SSLeay::connect($ssl) or die("ssl connect"); Net::SSLeay::version($ssl); } ############################################################################### sub http_daemon { my ($t) = shift; my $server = IO::Socket::INET->new( Proto => 'tcp', LocalHost => "127.0.0.1:" . port(8081), Listen => 5, Reuse => 1 ) or die "Can't create listening socket: $!\n"; local $SIG{PIPE} = 'IGNORE'; while (my $client = $server->accept()) { $client->autoflush(1); my $headers = ''; my $uri = ''; while (<$client>) { $headers .= $_; last if (/^\x0d?\x0a?$/); } $uri = $1 if $headers =~ /^\S+\s+\/([^ ]+)\s+HTTP/i; next unless $uri; $uri =~ s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg; my $req = decode_base64($uri); my $resp = index($req, $serial) > 0 ? 'resp' : 'ec-resp'; # ocsp dummy handler select undef, undef, undef, 0.02; $headers = <<"EOF"; HTTP/1.1 200 OK Connection: close Content-Type: application/ocsp-response EOF print $client $headers . $t->read_file("$resp.der"); } } ###############################################################################